OWS Powder Coated Windmill Aeration System

OWS 3 Leg Powder Coated Windmill Aeration System

Click the image(s) above to view larger version.

Powder Coated Windmill Aeration System

Powder Coated Windmill Aeration Systems includes - Airstone Diffuser and Foot Valve, 100 ft. Air line, 50 ft. Weighted Air line, Hose Connector Pack, & Pivot Points. Sizes are all 20'. Available in 3 leg and 4 leg models.

The blade diameter on all units is a full 73" in diameter which is the largest windmill head on the market for pond aeration. This allows our units to pump up to 4.5 CFM of air and still turn at low wind speeds due to our windmill heads higher torque. We can also produce up to 30 psi of air allowing these units to aerate ponds or lakes that are 10', 20' or even 30' deep.

The Outdoor Water Solutions “NEW” Wind Driven Aeration System offers:

  • New “BalCam” technology minimizes bearing fatigue
  • Patent pending new design
  • Fast & Easy Assembly
  • Manufactured with high quality 18 gauge galvanized steel
  • Newly redesigned blades and front dome assembly for better air flow
  • Self-governing head to protect the unit in high winds
  • New secure locking mechanism that attaches the windmill head to shaft
  • Larger check valves and upgraded ½” airline to handle the increased air that is produced
  • High Air Output - 3.0-4.5 CFM rating Rated at 30 psi
  • Full 5 year warranty on bearings and cams

Ships Freight Truck. Allow for up to 2 weeks for delivery.

Green and Yellow 3 Leg PWC0130
Green and Yellow 4 Leg PWC0130-LKT0105
Blue and White 3 Leg PWC0138
Blue and White 4 Leg PWC0138-LKT0105
Red and White 3 Leg PWC0006
Red and White 4 Leg PWC0006-LKT0105
Bronze 3 Leg PWC0021
Bronze 4 Leg PWC0021-LKT0105